|Operating Characteristic:||High Temperature||Processing Type:||Machined Parts|
|Packaging:||Expport Woodenbox Pacakge||QC Control:||100% Inspect By Us ,accept The Third Party Inspect|
|Item:||Customize High-Precision Crusher Copper Bushing||Bearing Mechanism:||Solid Friction|
|Copper Alloy:||Brass,bronze,Lead Bronze||Specification:||Full Sizes And Customized|
crusher wear parts,
crusher spare parts
High Precision Stone Crusher Machine Parts Long Long Life Maintenance Free
Cone crusher straight sleeve, crusher cone sleeve, crusher bowl shaped tile sleeve, crusher drive bearing, crusher lower thrust plate and other crusher accessories. Copper sleeve is an important part of cone crusher, such as eccentric shaft copper sleeve, moving cone copper sleeve and horizontal shaft copper sleeve, which play a very important role in the operation of the equipment.
Copper sleeve is an important part of cone crusher, such as eccentric shaft copper sleeve, moving cone copper sleeve and horizontal shaft copper sleeve, which play a very important role in the operation of the equipment. Let's take a look at the replacement of copper sleeve of cone crusher.
Replacement of copper sleeve of eccentric shaft
After the lock packing is drilled and broken, the eccentric sleeve can be inverted to take out the copper sleeve. Before installing the new copper sleeve, it is necessary to check whether the inner hole size of the eccentric sleeve has cracks. When installing the copper sleeve of eccentric shaft, it can be cooled by dry ice. When pouring the locking packing, the eccentric sleeve and copper sleeve must be placed at a temperature of about 70 ℃, and the oil holes of the eccentric sleeve and copper sleeve must be aligned.
Replacement of moving cone copper sleeve
The copper sleeve under the moving cone can be sawed off, but make sure not to damage the inner hole of the moving cone. The copper sleeve on the moving cone can be pulled out directly, and can be cooled with dry ice to speed up the pulling out speed. During installation, the moving cone copper sleeve can be cooled with dry ice for at least 2 hours. When the cooling is sufficient, the copper sleeve shall be lifted with its lifting ring, and the flat gasket shall be used under the lifting ring to ensure that the edge of the copper sleeve is parallel to the bottom edge of the moving cone.
Replacement of copper sleeve of horizontal shaft
The outer copper sleeve can be taken out by a self-made pulling device, and the inner copper sleeve can be removed by hammering with a central rod device. After the copper sleeve is removed, it is necessary to check whether the inner hole size of the axle frame is reasonable. When installing the copper sleeve of horizontal shaft, use dry ice to shrink for at least 2 hours
|Company Type||Manufacture factory SGS Audit supplier|
|Material||Brass, Tin bronze, Lead bronze,Aluminum bronze,ect|
1. High load capacity Cood anti-wearing
2. Low coefficients of friction
4. High corrosion resistance
6.No contaminant by oil or grease
|Process||Centrifugal casting,sand casting,Machining,Injection|
|Quality assurance||2D Projector, Height Gague,Micrometer,Roughness Tester,
CCD Autimatic Testing Machine CCD,Callipers
Height and length:+/- 0.01mm.
|Lead time||According to required time|
Applied in: diesel engine, automobile, agricultural machinery, hydraulic machinery, machine tools, forestry machinery, construction machinery,
mining, railway, ship, petrochemical machinery, die-casting machine, metallurgical equipment; food packaging machinery, textile, light industrial
machinery and aviation, weapons and other industries and departments of various machines.
Please read the following carefully. It may save you a lot of time and money.
1. Our products are all self-produced and self-selling, the same quality, compared to other families to preferential - ---
professional production customization.
2, as like as two peas or centrifuge, the products produced by our company are made of blank according to the manual
formula, and then processed by the whole NC program. The material and size accuracy are guaranteed. There are many
products on the market. The picture looks exactly the same, but the inferior material with less than 50% copper content is used.
Table lathe processing, so that the accuracy of the product can not be guaranteed, the future will bring you a lot of trouble in the installation and use.
After the completion of the product, our logistics personnel are required to clean, wipe oil, pack film, load wooden cases and other processes. It's packed in wooden cases. The boards are fumigated and meet the export standards