|Use:||Ore Mining||Feature:||High Wear Resistance|
|Drawing:||Welcome||Copper Alloy:||Brass/bronze/lead Bronze|
|Datail:||Superior Surface Finish||Lead Time:||According To The Quantity|
|Operating Characteristic:||High Temperature||Packaging:||Wooden Carton/Box|
flanged sleeve bushing,
bronze flanged bushings
Custom Brass / Copper / Bronze High Temperature Bushing Machining Flange Screw
Flange bushing, as the name implies, is flanged outside the bushing, i.e. flanged bushing, which functions as follows:
1. As far as the flange is concerned, it generally plays a role of positioning and is not easy to fall off and slide;
2. Bushing: the bushing is mainly used to protect the shaft and the base from direct wear. Generally, the material of the bushing is slightly soft. If it is worn against the shaft, the bushing will be worn and worn, so it can be replaced easily. If the bushing is not used, the parts are replaced after wear. Now the bushing is replaced; the price is generally cheaper and easy to process; it plays an important role in the normal application and maintenance of mechanical equipment.
We produce all kinds of straight sleeve and flanged sleeve, our sleeve can be produced according to customer's requirements, materials include red copper, brass, aluminum bronze, tin bronze, lead bronze, phosphorus bronze, aluminum, iron, zinc base alloy and other metal alloys. Bushing includes copper alloy bushing, bimetal bushing, graphite bushing, zinc base alloy bushing, aluminum bushing, etc. It has the characteristics of high strength, wear resistance, heat resistance, acid resistance, etc.
Because the flange copper sleeve is made of copper, as long as its size is large, it will increase the weight of the flange copper sleeve a lot, which also causes its installation to be more difficult. We must be careful when installing, and we can't force the installation, let alone use a sledgehammer to knock. One is the choice of tools when we install, so we can choose a suitable tool Good installation of the flange copper sleeve, there is also our flange copper sleeve installation environment, environmental cleaning directly leads to our flange copper sleeve can be installed successfully, seriously will affect its service life.
1.When casting the flange copper sleeve, it should be careful, and it is not allowed to punch it forcefully. It is not allowed to knock the bearing directly with a hammer, and it is not allowed to transfer the pressure through the rolling element.
2. Proper and accurate installation tools shall be used for copper casting, special tools shall be used as far as possible, and cloth and short fiber shall be avoided.
3. Try to keep the copper sleeve casting and its surrounding environment clean. Even if the invisible smile dust enters the straight copper sleeve, the copper casting will increase the wear, vibration and noise of the straight copper sleeve.
4. In order to prevent the corrosion of the copper sleeve, when taking the bearing by hand, the sweat on the hand shall be fully washed off during copper casting, and the operation shall be carried out after being coated with mineral oil. In rainy season and summer, special attention shall be paid to rust prevention
|Tolerance||Manufacture factory SGS Audit supplier|
|Quality assurance||2D Projector, Height Gague,Micrometer,Roughness Tester,
CCD Autimatic Testing Machine CCD,Callipers
|Process||Centrifugal casting,sand casting,Machining,Injection|
|Company Type||Manufacture factory SGS Audit supplier|
Our company's copper sleeve, copper tile, copper slide plate, copper worm gear, self-lubricating bearing and other products cover tin bronze, aluminum bronze, lead bronze, brass and other copper base alloy and metal plastic composite materials. Welcome to order.